Halloween Crow Wreath

My favorite season, Fall, is here and Halloween is fast approaching.  I’m not afraid to admit that I essentially love everything “basic” about this season.  Although I do find pumpkin spice lattes a bit too sweet, I love decorating, going to pumpkin patches, and the impending chilly weather (but in SF it’s more like the weather finally matches the season).  In the past I had put some maize corn on our door as a decoration, but last year I saw some really cute fall wreaths on Pinterest and decided to make my own.  Here’s how you can make this really cute wreath yourself!

final-wreath-for-blog

Materials:

materialsStyrofoam “donut circle” – 12in diameter
1 yard black ribbon
2 yards chevron orange and white ribbon
Toy crow
Gold felt pen
1 ft twine
Hot glue gun & extra glue
Black felt square
Small piece of fabric of your pattern choice – I purchased 1 yard at the store because I knew I’d use it again, but really you only need enough to make your crow a large enough hat.

Instructions:

1. Start with the chevron orange ribbon and styrofoam. Using the hot glue gun, glue the beginning end to what you’ll deem the back of the wreath. Then, slowly wrap the ribbon around the styrofoam.  Every two wrap-arounds, use the hot glue gun to glue down the ribbon.  In the image below, I would put a small line of glue where the ribbon is hitting the styrofoam.  Do this until you have again reached your starting point (it’s OK if it overlaps a little), and make sure the end part of the ribbon is glued on the back.

ribbon

2. Take the twine and measure the length you’ll have the “boo” sign reach one side of the styrofoam to the other and cut.  You’ll want a bit of slack so it looks like the sign is hanging.  Do NOT glue on styrofoam yet.

twine-1

3. Cut out three small triangles from the black felt and write out “BOO” with each letter on a separate triangle.

boo-cutouts

4. Using the hot glue gun, glue each triangle onto the twine.  Once the glue has dried, glue the twine onto styrofoam at the points where you previously measured.

boo-glued

5. Time to make a cute hat for your crow!  Take a piece of fabric and roll it into a cylinder hat shape that is an appropriate size for the crow.  Use the hot glue gun to glue it together.  If you’d like, you can take a piece of twine and make a bottom liner for the hat and glue on with the hot glue gun.  Once you’ve created your hat, glue onto the crow.  I found the easiest way to do this was to put some glue on the crow’s head approximately how wide the hat is and press down lightly.

hat

6. Hot glue gun your crow onto the wreath wherever you’d like him to sit.  I also took some twine and feathered the edges to make it look as though he was sitting on a broom.  Hot glue gun that near his feet!

crow-close-up

7.  Lastly, figure out where you’d like to hang the wreath.  Take your black ribbon and loop in around the top of your wreath and tie the top into a nice bow.  You can shorten your ribbon if you’d like the wreath to hang higher. boo-close-up

8. Hang your wreath and enjoy!  Happy Halloween!

final-wreath

Dim Sum Steamer Round Shelf

As I’m sure many of you also do, I rent.  I also have a bunch of tchatskis/pictures/etc and not a lot of space, so I need to utilize some vertical space to display them.  I bought some shelves from Urban Outfitters that I thought were really cool, but would have required 4 screws each.  Eight holes in the wall is not really the best situation when you’re renting.  My boyfriend and I kept getting cold feet before putting them up, so I started exploring more options for shelving that required only one small hole.  (Ps – If you’re interested in two really cute shelves from Urban Outfitters and are not concerned about holes, hit me up.)  What initially came to mind was some type of shelf/shelves that hung with rope or string and therefore required only one or two holes each (thus creating little damage to the walls).  I found a round shelf I really liked on some site, but waited too long and it somehow totally disappeared.  I wasn’t able to find a similar style, which really surprised me.  Anyway, upon looking endlessly for DIY round shelves, I came across this post from A Pair and A Spare DIY and thought it was a really great idea!  I think she found her dim sum steamer just walking on the streets in Hong Kong, so I was initially a little skeptical of how I was going to replicate this.  However, my boyfriend mentioned that we could probably find one at a restaurant warehouse store.  HE WAS RIGHT!   A google search just happened to bring up Kamei Restaurant Supply in San Francisco, and it just happens to specialize in Asian restaurant supplies.  Jackpot!  Were able to find a fairly large one that would nicely match the size of our wall (and fit a bunch of stuff!).  Anyway, this is a great project for those of us who want something a little unique with little damage to the walls.  Now here’s what you’re really looking for…how to make it!

Dim Sum Steamer Shelf 1

You’ll need:

A Dim Sum Steamer of your size choice

Piece of plywood – got this from Home Depot

Rope – I used Wellington 28764 Manila Rope, 1/4″ X 50′ (you can find it on Amazon)

Wood Glue

Hacksaw

Wood file

Drill

Measuring tape

Hanging materials (Hercules hook, picture hook, nail, etc)

 

dim sum steamer shelf supplies

Directions:

1. Remove the criss cross backing of the dim sum steamer.  This was actually pretty easy and you just need to wiggle the pieces to get them to come out.

694

2. Cut the plywood down with the hacksaw so it is an appropriate size to fit approximately where you’d like the shelf to stand.  I put mine about 3/4 of the way down, but you can make it higher or lower as you please.

3. We cut wedges in the plywood so it sat comfortably and fit like a puzzle in the sides of the steamer.  This also required some use of the wood file to make it exact. (Thanks to my awesome boyfriend for helping me with this step!)

3.28.15 import 020 3.28.15 import 021

4. Use the wood glue to glue the shelf onto the sides of the dim sum steamer.  The shelf should fit snug and stay put naturally, but it was very hard to get it that way, and still wasn’t completely exact, so I’d recommend using some glue to ensure it stays.

3.28.15 import 028

5. Use the drill to drill two holes on both sides of the steamer.  Be sure to measure so that the holes are even!

3.28.15 import 027

6.  Thread the rope through the holes and tie.

3.28.15 import 060 3.28.15 import 061

7. Hang up on your wall using whatever hanging materials you deem necessary for the wall you are hanging it on.  We choose a picture hook.  Decorate however you please!

3.28.15 import 065